IC693PWR331

GE-IP | 9030 | GE Fanuc 90-30 GE-IP PLC

IC693PWR331 Image

IC693PWR331

  • Availability: In Stock Ships Today!
  • Units in Stock: Immediate Availablity: 5 Units!
  • Call for best Pricing+ 1 919 680 1773
  • Manufacturer: GE-IP
  • Description: High Capacity, Power Supply, 24 Vdc
  • Weight: 1 lbs :: ≈ 1 kgs
  • Warranty: 1 Years
  • Product Revisions Available:
  • Other Available Revisions of the IC693PWR331 : A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z,

Product Manual Excerpt

IC693PWR331 High Capacity Power Supply, 24 VDC Input The Series 90-30 DC input High Capacity power supply (IC693PWR331) is a 30 watt wide range supply designed for 24 VDC nominal inputs. For applications requiring greater +5V current capacity than is available with the standard supply, this supply allows all 30 watts to be consumed from the +5 V output. It will accept an input voltage range from 12 VDC to 30 VDC. Although it is capable of maintaining all outputs within specifications with input voltages as low as 12 VDC, it will not start with initial input voltages of less than 18 VDC. This power supply provides the following outputs: +5 VDC output. +24 VDC Relay power output which provides power to circuits on Series 90-30 Output Relay modules. Isolated +24 VDC, which is used internally by some modules, can also be used to provide external power for 24 VDC Input modules. The load capacity for each output of this power supply is shown in the following table. Table 4-10. IC693PWR331 Power Supply Capacities Catalog Number Load Capacity Input Output Capacities (Voltage/Power ) IC693PWR331 30 Watts 12 to 30 VDC +5 VDC 30 watts +24 VDC Isolated 20 watts +24 VDC Relay 15 watts Total of all outputs combined cannot exceed 30 watts. PROGRAMMABLE CONTROLLER SYSTEM STATUS INDICATORS a45625A + PWR OK RUN BATT BATT E R LITHIUM Y BACK UP BATTERY BATTERY CONNECTOR RS 485 COMPATIBLE SERIAL PORT CONNECTIONS FOR DC POWER SOURCE INTERNAL POWER SOURCE FOR MODULES REQUIRING 24VDC IC693PWR331 GE Fanuc Series 90-30 POWER SUPPLY 24 VDC OUTPUT 0.8A MAX. HIGH CAPACITY + INPUT 24 VDC 50 WATT Figure 4-8. Series 90-30 24 VDC Input High Capacity Power Supply - IC693PWR331 4 4-14 Series 90 30 PLC I/O Module Specifications July 2000 GFK 0898F Table 4-11. Specifications for IC693PWR331 Power Supply Nominal Rated Voltage Input Voltage Range Start Run 24 VDC 18 to 30 VDC 12 to 30 VDC Input Power 50 watts maximum at full load Inrush Current 4 Amps peak, 100 milliseconds maximum Output Power 5 VDC: 30 watts maximum 24 VDC Relay: 15 watts maximum 24 VDC Isolated: 20 watts maximum NOTE: 30 watts maximum total (all three outputs) Output Voltage 5 VDC: 5.0 VDC to 5.2 VDC (5.1 VDC nominal) 24 VDC Relay: 19.2 to 28.8 VDC 24 VDC Isolated: 19.2 VDC to 28.8 VDC Protective Limits Overvoltage: Overcurrent; 5 VDC output: 6.4 to 7 V 5 VDC output: 7 A maximum Ride Through Time: 10 ms minimum Standards Refer to data sheet, GFK-0867B, or later version for product standards, and general specifications. Derate per figure below at ambient temperatures above 50 C (122 F). Current Derating for Higher Temperatures 10 30 55 5 VDC CURRENT AMBIENT TEMPERATURE (Degrees C) 0 60 4.0 5.0 6.0 6.1 4.2 4.4 4.6 4.8 5.2 5.4 5.6 5.8 20 40 50 Figure 4-9. 5 VDC Current Output Derating for Temperatures above 50 C (122 F) Series 90 30 Power Supplies 4 GFK 0898F Chapter 4 Series 90 30 Power Supplies 4-15 Calculating Input Power Requirements for IC693PWR331 Use the following procedure to determine input power requirements for the 24 VDC High Capacity Power Supply: Determine total output power load from typical specifications listed for individual modules at the end of this chapter. Multiply the output power by 1.5 to determine the input power value. Divide the input power value by the operating source voltage to determine the input current requirements Use the lowest input voltage to determine the maximum input current Allow for start-up surge current requirements Allow margins (10% to 20%) for variations 4 4-16 Series 90 30 PLC I/O Module Specifications July 2000 GFK 0898F IC693PWR332 High Capacity Power Supply, 12 VDC Input The Series 90-30 DC input High Capacity power supply (IC693PWR332) is a 30 watt wide range supply designed for 12 VDC nominal input power. It will accept an input voltage range from 9.6 VDC to 15 VDC. This power supply provides the following outputs: +5 VDC output. +24 VDC Relay power output which provides power to circuits on Series 90-30 Output Relay modules. Isolated +24 VDC, which is used internally by some modules, can also be used to provide external power for 24 VDC Input modules. The load capacities for each output of the power supply are shown in the following table. Table 4-12. High Capacity 12 VDC Input Power Supply Capacities Catalog Number Load Capacity Input Output Capacities (Voltage/Power ) IC693PWR331 30 Watts 9.6 to 15 VDC +5 VDC 30 watts +24 VDC Isolated 20 watts +24 VDC Relay 15 watts Total of all outputs combined cannot exceed 30 watts. SYSTEM STATUS INDICATORS a45625B + PWR OK RUN BATT BATT E R LITHIUM Y BACK UP BATTERY BATTERY CONNECTOR RS 485 COMPATIBLE SERIAL PORT CONNECTIONS FOR DC POWER SOURCE INTERNAL POWER SOURCE FOR MODULES REQUIRING 24VDC IC693PWR332 GE Fanuc Series 90-30 POWER SUPPLY 24 VDC OUTPUT 0.8A MAX. HIGH CAPACITY + INPUT 12 VDC 50 WATT Figure 4-10. Series 90-30 12 VDC Input High Capacity Power Supply - IC693PWR332 Series 90 30 Power Supplies 4 GFK 0898F Chapter 4 Series 90 30 Power Supplies 4-17 Table 4-13. Specifications for IC693PWR332 Nominal Rated Voltage Input Voltage Range 12 VDC 9.6 to 15 VDC Input Power 50 watts maximum at full load Inrush Current 4 Amps peak, 100 milliseconds maximum Output Power 5 VDC: 30 watts maximum 24 VDC Relay: 15 watts maximum: 24 VDC Isolated: 20 watts maximum: 30 watts maximum total (all three outputs) Output Voltage 5 VDC: 5.0 VDC to 5.2 VDC (5.1 VDC nominal) Relay 24 VDC: 19.2 to 28.8 VDC Isolated 24 VDC: 19.2 VDC to 28.8 VDC Protective Limits Overvoltage: Overcurrent; 5 VDC output: 6.4 to 7 V 5 VDC output: 7 A maximum Ride Through Time: 10 ms minimum Standards Refer to data sheet, GFK-0867B, or later version for product standards, and general specifications. Derate per figure below at ambient temperatures above 50 C (122 F). 10 30 55 5 VDC CURRENT AMBIENT TEMPERATURE ( Degrees C) 0 60 4.0 5.0 6.0 6.1 4.2 4.4 4.6 4.8 5.2 5.4 5.6 5.8 20 40 50 Figure 4-11. 5 VDC Current Output Derating for Temperatures above 50 C