Call Us Today!
1-919-535-3180
sales@plcfactory.com

GE Fanuc Series 90-30 PLC

IC693PWR321 | GE Fanuc



Rate the IC693PWR321
Rated 4.6/5 based on 5 ratings.

In Stock

Ships Today!

Immediate Availablity: 132 Units!


Manufacturer GE Fanuc
Description GE Fanuc Series 90-30 30 Watt Power Supply 120/240 Vac 125 Vdc Battery not Included
Weight 4 lbs :: ≈ 2 kgs
Warranty 1 Years
Other Available Revisions of the IC693PWR321 : A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z, -AA, -BB, -CB,

AC/DC Input Power Supplies IC693PWR321 Standard Power Supply, 120/240 VAC or 125 VDC Input The IC693PWR321 is a 30 watt supply that can operate from an input voltage source in the range of 85 to 264 VAC or 100 to 300 VDC. This power supply provides three outputs: +5 VDC output, +24 VDC Relay power output which provides power to circuits on Series 90-30 Output Relay modules. Isolated +24 VDC, which is used internally by some modules, can also be used to provide external power for 24 VDC Input modules. The load capacity for each output of this power supply is shown in the following table. Table 4-2. IC693PWR321 Power Supply Capacities Catalog Number Load Capacity Nominal Input Output Capacities (Voltage/Power ) IC693PWR321 30 Watts 100 to 240 VAC or 125 VDC +5 VDC 15 watts +24 VDC Isolated 20 watts +24 VDC Relay 15 watts Total of all outputs combined cannot exceed 30 watts. STANDARD 125 VDC, 50W + 100 240 VAC 50/60HZ 90 VA 24 VDC OUTPUT 0.8A MAX. INPUT POWER SUPPLY PROGRAMMABLE CONTROLLER SERIES 90 30 IC693PWR321 GE Fanuc CONNECTIONS INTERNAL 24VDC MODULES REQUIRING FOR POWER SOURCE SOURCE AC/DC POWER FOR a45613 PWR OK RUN BATT BA TT E RY LITHIUM BATTERY RS 485 SYSTEM BATTERY BACK UP SERIAL PORT COMPATIBLE CONNECTOR INDICATORS STATUS ∼ Figure 4-1. Standard AC/DC Input Power Supply - IC693PWR321 Power supplies must be installed in the leftmost slot in all baseplates. Series 90 30 Power Supplies 4 GFK 0898F Chapter 4 Series 90 30 Power Supplies 4-3 Note Previous versions of this power supply had five terminals on the terminal block. The new version (shown above), which has six terminals, is functionally the same as the previous version. The change was made to conform to European EC requirements. Table 4-3. Specifications for IC693PWR321 Standard AC/DC Input Power Supply Nominal Rated Voltage Input Voltage Range AC DC 120/240 VAC or 125 VDC 85 to 264 VAC 100 to 300 VDC Input Power (Maximum with Full Load) 90 VA with VAC Input 50 W with VDC Input Inrush Current 4A peak, 250 milliseconds maximum Output Power 5 VDC and 24 VDC Relay: 15 watts maximum 24 VDC Relay: 15 watts maximum 24 VDC Isolated: 20 watts maximum NOTE: 30 watts maximum total (all three outputs) Output Voltage 5 VDC: 5.0 VDC to 5.2 VDC (5.1 VDC nominal) Relay 24 VDC: 24 to 28 VDC Isolated 24 VDC: 21.5 VDC to 28 VDC Protective Limits Overvoltage: Overcurrent: 5 VDC output: 6.4 to 7 V 5 VDC output: 4 A maximum Holdup Time: 20 milliseconds minimum